YASKAWA MP3000 Series Setup Manual page 251

 Status
If an alarm or a warning occurs, the alarm or warning status will be shown on the Alarm Monitor
Tab Page in the following way:
Icon
No Alarm
Occurred
Occurred
Displaying Alarms and Warnings
If an alarm or a warning occurs, double-click the axis where the alarm or warning occurred to
display the Alarm/Warning Dialog Box.

No. Item

Axis name

Alarm Clear

Help

Refresh

Alarms/warnings display

Close
Troubleshooting Alarms and Warnings
When an alarm occurs, the status will change to
tus will change to
Click the status indicator to display the Alarm/Warning Dialog Box to see details on the alarm
or warning.
This section uses a SERVOPACK Communications Error as an example to describe what to do
when an alarm or warning occurs.
Name
No alarm or warning has occurred.
Alarm: An alarm has occurred.
A warning has occurred.
This row displays the name of the axis. The display takes the fol-
lowing format: Assigned axis number : Comment : Type.
This button clears the alarm.
This button displays the manual related to the alarm that occurred:
MP3000 Series MP3200/MP3300 Troubleshooting Manual (Manual
No.: SIEP C880725 01).
This button updates the contents of the Alarm/Warning Dialog Box.
Displays the parameter name, the bit number, and the status.
This area shows the alarm and warning information bit by bit for
each Motion Module.
This button closes the Alarm/Warning Dialog Box.
.
5.3 Monitoring Machine Operation
5.3.2 Alarm Monitor
Function





Function
. When a warning occurs, the sta-
5
5-41