YASKAWA MP3000 Series Setup Manual page 118

3.6 Device-specific Settings
3.6.4 Setting Machine-specific Motion Parameters
 Fixed Parameter Setting
The fixed parameters of the Machine Controller are set according to the machine.






No.








3-40
Item
Tool Bar
Axis...
Axis Display
Reference Unit and Electronic
Gear Setting
Axis Type Setting
Absolute Position Detection Set-
ting
Fixed Parameter Saving
Close

Description
Refer to Tool Bar (1) in the Axis Setup Wizard Dialog Box.
This button is disabled.
Displays the selected axis.
Displays the Reference Unit/Electronic Gear Dialog Box to set the
reference unit and the electronic gear.
Displays the Axis Type Setting Dialog Box to set the motor type
and the axis type.
Displays the Absolute Position Detection Setting Dialog Box to
set the simple absolute infinite axis position management and
maximum number of absolute encoder rotations.
Displays the Fixed Parameter Saving Dialog Box to save the
modified values of the fixed parameters.
Closes the Fixed Parameter Setting Dialog Box.
