Online Security - YASKAWA MP3000 Series Setup Manual

6.3 Online Security

6.3

Online Security

Online security refers to limiting the ability to read data from the Machine Controller.
You can set security key (i.e., a password) and privilege levels for programs to restrict the ability
to read the program data from the Machine Controller or to open the programs to users who
have at least the specified level of file reading privilege.
Current Status
Apply File Reading
Restriction
Restriction Privilege
Security Key and Security
Key Confirmation
Change the Security
Key Button
Set Button
Set to None Button
Unlock Button
Close Button
Important
6-10
Item
This area displays the current status of the security setting.
Select this check box to apply a reading restriction. This check box can be used
to set file reading restrictions for ladder programs, motion programs, and C pro-
grams.
Note: If a value is entered in the Security Key Box without selecting the Apply
File Reading Restriction Check Box, only the security key will be set. The
file reading restriction will not be set.
Use this box to set the privilege level to restrict the group of users who can read
the files.
Note: The user must have a privilege level at least as high as the specified privi-
lege to read the files.
Enter the password that will be required to set online security. Enter from 1 to 8
alphanumeric characters. The password is case sensitive.
Click this button to change the security key.
Click this button to set the file reading restriction.
Click this button to delete the current security key setting.
Click this button to temporarily unlock the current online security.
Even if you save the settings to the flash memory while the security key is tem-
porarily unlocked, the temporary unlocked status will not be saved, and the
online security setting will be maintained.
The temporary unlock will be valid until you turn OFF the power supply to the
Controller, disconnect the MPE720 from the Controller, or press the Lock Button
on the Security Setting Dialog Box.
Click this button to close the Security Setting Dialog Box.
If the reading privilege is set to 4, then programs with a reading privilege of 4 or higher cannot be
opened.
To manage program security, the current user must have a writing privilege level of 7.
Description