Data Transfer Without Using The Mpe720; Using Usb Memory - YASKAWA MP3000 Series Setup Manual

4.6

Data Transfer without Using the MPE720

This section describes how to transfer project file data without using the MPE720.

Using USB Memory

Using the MPLoader
Using the MPLoad Maker
4.6.1

Using USB Memory

You can transfer user application data between the RAM in the CPU Unit/CPU Module and the
USB memory device with the MP3200 (CPU-201, CPU-202) or MP3300 (CPU-301, CPU-302).
Specifications
The following table gives the USB memory specifications.
Item
Supported media
Applicable FAT
Maximum number of nested
directories
File information
Maximum length for file name
and directory names
Current directory function
Maximum number of simulta-
neously open files
Formatting
Recommended USB Memory Device
The following USB memory device is recommended. It can be purchased from Yaskawa.
SFU24096D1BP1TO-C-QT-111-CAP
Functions
The following table gives the functional specifications of the USB memory.
Item
Operating switches
Batch load
Batch save
Method
Specification
USB memory
FAT16/32
10
Last update time-
stamp supported.
256 characters
16
16
Not supported.
Model
4-GB USB memory
Specification
Uses 2 pins on SW1.
USB memory to CPU Unit/
CPU Module
(non-volatile memory)
CPU Unit/CPU Module
(RAM) to USB memory

4.6 Data Transfer without Using the MPE720

Reference
Using USB Memory (page 4-71)
Using the MPLoader Ver.4 (page 4-74)
Using the MPLoad Maker (page 4-76)
Remarks
−
−
−
Uses the calendar in the Controller.
Refer to the following manual for details.
MP3000 Series MP3200 User's Manual (Manual No.:
SIEP C880725 10)
−
−
−
Use a formatted USB memory device.
Specification
Swissbit Japan Inc.
Description
LOAD: Performs batch loading when the power is turned
ON.
INIT: Register transfer selection
• Controls the operation based on the settings of the
above operation switches.
• User applications and registers are transferred.
4.6.1 Using USB Memory
Manufacturer
4-71
4