Watch Panes - YASKAWA MP3000 Series Setup Manual

5.1.3

Watch Panes

You can monitor the values and comments of the specified S, I, O, M, C, D, and G registers on
the Watch 1, 2, and 3 Panes. Realtime monitoring is possible if the Machine Controller is con-
nected. You can edit the values.
When a project link is used, the data registered in the Watch Pane is saved only to the Machine
Controller. To apply the watch data to the project file, transfer all of the data from the Machine
Controller.
Note
Displaying Watch Data
1.
Click one of the tabs for the Watch 1, 2 or 3 Panes.
Select Monitor − Watch from the Launcher. The Watch 1 Pane will be displayed.
Note: You can show or hide the Watch 1, 2, and 3 Panes by selecting View − Watch − Watch 1, View −
Watch − Watch 2, or View − Watch − Watch 3 from the menu bar.
Double-click the Variable Column or press F2 to show the text cursor, and then enter
2.
the register or variable register to monitor.
Note: 1. You can also drag or copy registers from the ladder program or from the Variables Pane.
2. When monitoring D registers, enter the program number as shown below.
3.
Press the Enter Key.
The contents of the specified register will be displayed.
If you right-click a row, you can select Decimal, Hex, Binary, or ASCII from the pop-up menu to
change the data type of the Value Column.
5.1 Debugging Ladder Programs

5.1.3 Watch Panes

5
5-7