Test Run Dialog Box Details - YASKAWA MP3000 Series Setup Manual

3.7.3

Test Run Dialog Box Details

This section provides a detailed description of the Test Run Dialog Box.
You can select jogging or stepping by clicking the tabs.





No. Item

Tool Bar

Axis

Axis Display

Status

Enable

Disable

Monitor

Speed Reference

Forward

Reverse
11 Step Distance
12 Direction Setting
Forward/Reverse Status
13
14 Repetition Counter Status
Run
15
16 Stop
Jogging
 
Axis Monitor Displays the Axis Monitor Tab Page in the Main Window.
Alarm Monitor Displays the Alarm Monitor Tab Page in the Main Window.
Refresh Updates the test run information.
Displays the Axis Selection Dialog Box.
Displays the selected axis.
Displays the operating status of the axis and any alarms that
occurred.
Turns ON the axis servo.
Turns OFF the axis servo.
Displays the Alarm/Warning Dialog Box.
Displays the Speed Reference Setting Dialog Box. Set the speed
(speed reference value) for axis rotation.
While this button is pressed, the axis rotates in the positive direc-
tion.
While this button is pressed, the axis rotates in the negative direc-
tion.
Displays the Step Distance Setting Dialog Box. Set the step dis-
tance for the axis.
Displays the Direction Setting Dialog Box. Set the starting direction
and the number of rotations for the step operation.
The
Displays the repetition status as the current repetition count/set
repetition count.
Performs stepping in the direction that was specified in the Direc-
tion Setting Dialog Box.
Stops the stepping operation.
3.7.3 Test Run Dialog Box Details



11
12
13
15
Function
mark indicates the current step direction.
3.7 Test Run
Stepping
14
16
3
3-55