Setting The Default User; User Management - YASKAWA MP3000 Series Setup Manual

6.1 Project File Security

6.1.4 Setting the Default User

6.1.4

Setting the Default User

Select Security and then Default User Setting from the tree structure in the Environment
Setting Dialog Box. The Default User Setting View will be displayed.
Select the Select the default user Check Box to enable accessing the project file (or the
Machine Controller) with the default user account. If the specified user name is not among the
registered users, the Logon Dialog Box will be displayed.
Enter from 1 to 16 alphanumeric characters into the Default User Name and Default Pass-
word Boxes.
6.1.5

User Management

You can register and change the name of users who can open a project file.
You can make this setting when the project file is open, or when the Machine Controller is
online. If the setting is performed while the Machine Controller is online, the setting will provide
access and writing privileges to the Machine Controller.
Important
6-4
If you forget the password that you set, there is no way to recover it and it will be impossible for
the user to open the password-protected project file.