YASKAWA MP3000 Series Setup Manual page 10

 Installation
 Do not install the Machine Controller in any of the following locations.
• Locations that are subject to direct sunlight
• Locations that are subject to ambient temperatures that exceed the operating conditions
• Locations that are subject to ambient humidity that exceeds the operating conditions
• Locations that are subject to rapid temperature changes and condensation
• Locations that are subject to corrosive or inflammable gas
• Locations that are subject to excessive dust, dirt, salt, or metallic powder
• Locations that are subject to water, oil, or chemicals
• Locations that are subject to vibration or shock
There is a risk of fire, electrical shock, or device damage.
 Never install the Machine Controller in an atmosphere containing halogen (fluorine, chlorine,
bromine, or iodine).
There is a risk of malfunction or damage.
 Do not step on the Machine Controller or place heavy objects on the Machine Controller.
There is a risk of injury or an accident.
 Do not block the air exhaust ports on the Machine Controller. Do not allow foreign objects to
enter the Machine Controller.
There is a risk of internal element deterioration, malfunction, or fire.
 Always mount the Machine Controller in the specified orientation.
There is a risk of malfunction.
 Leave the specified amount of space between the Machine Controller, and the interior surface of
the control panel and other devices.
There is a risk of fire or malfunction.
 Do not subject the Machine Controller to strong shock.
There is a risk of malfunction.
 Suitable battery installation must be performed and it must be performed only by an experi-
enced technician.
There is a risk of electrical shock, injury, or device damage.
 Do not touch the electrodes when installing the Battery.
Static electricity may damage the electrodes.
x
CAUTION