YASKAWA MP3000 Series Setup Manual page 265

 Trace List
The Trace List displays the traced data, the trace data that was read from external files, and a
history of the trace data.
You can use this information to check the waveforms, the displayed graphs, and details on the
traced data.
Use the check boxes to show or hide the waveforms on the graph display.








No. Display

Trace Data

Trace name

Trace group name

Registers

File & History Data

Trace name

Registers
Displays the trace data of the traced targets.
Displays the name of the trace.
The trace data is displayed in groups, where one group consists of the
data that was included in the Trace Target List Tab Page of the Trace
Data Setting Dialog Box, and the other group consists of other data.
Displays the registers that were traced.
The register names are displayed in the same color as their trace lines.
Displays a list of trace targets that were registered for tracing, and
trace data that was read from external files.
Displays the name of trace data that was registered for tracing, and
trace data that was read from external files.
You can save up to five backups of the file and history data.
Displays the names of trace data that was registered for tracing, and
traced registers that were read from external files.
The register names are displayed in the same color as their trace lines.
5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
Function
5
5-55