Mechanical Operating Conditions - YASKAWA MP3000 Series Setup Manual

 Control Panels with Forced-air Cooling
Use one of the following methods to ensure 0.03 m
• Forced draft method (A fan or a similar device is used to circulate the air in the interior and the
exterior of the panel.)
• Forced circulation method (A fan or a similar device is mounted to the airtight panel to circu-
late the air inside.)
Use the following guideline when selecting the fan:
• CPU Unit's resistance to air flow: 6×10
• The CPU-202 has a built-in fan. You do not need to select or install a fan.
Note
30 mm min.
A.1.2

Mechanical Operating Conditions

Item
Vibration Resistance
Shock Resistance
6
Fan
CPU Unit's internal resistance to
air flow: 610
Average airflow:
0.03 m /min
3
Specification
Conforms to JIS B 3502.
Vibration amplitude and acceleration:
10 Hz ≤ f < 57 Hz with vibration amplitude of 0.075 mm
57 Hz ≤ f ≤ 150 Hz with fixed acceleration of 9.8 m/s
10 sweeps each in X, Y, Z directions (sweep: 1 octave/min)
Conforms to JIS B 3502.
Peak acceleration of 147 m/s
Y, and Z directions
A.1 MP3200 Installation and Usage Conditions
A.1.2 Mechanical Operating Conditions
3
/min average airflow below the CPU Unit.
2 8
(N⋅s /m )
(Ns /m )
6 2 8
2
2
twice for 11 ms each in the X,
40 mm min.
30 mm min.
40 mm min.
AppA
A-3