Connecting The Mp3200 - YASKAWA MP3000 Series Setup Manual

2.1.3

Connecting the MP3200

Use the following procedure to connect the MP3200.
Before you connect the MP3200, install the Battery into the CPU Unit.
Note
1.
Remove the rubber cap from the connector on the Power Supply Unit.
• When the connector is not in use, always cover it with the rubber cap.
• The left-side cap is marked with an L, and the right-side cap is marked with an R.
Note
Battery Installation (page 2-14)
2.1 MP3200 Installation

2.1.3 Connecting the MP3200

2
2-9