Revision History - YASKAWA MP3000 Series Setup Manual

Revision History

The revision dates and numbers of the revised manuals are given on the bottom of the back cover.
MANUAL NO. SIEP C880725 00C <0>-1
Published in Japan March 2012
Date of Rev. WEB
Publication No. Rev. No.
April 2017 <3>
February 2017
September
2016
December
2015
January 2015
June 2014 <2>
September <1>
2012
March 2012 <0>
December –
2011
WEB revision number
Revision number
Date of publication
Section
4 2.3.2 Addition: Description of CPU-202
3 4.6.1 Revision: Correction of terms used in the table about batch saving to USB memory
(Change from "Registers to Load" to "Registers to Save".)
Back cover Revision: Address
2 1.1, 3.6.5, Addition: Information on the CPU-302
4.6.1
3.6.5 Revision: High-speed scan time set values depending on whether the MP2000
Optional Module is used
2.3.5 Revision: Change of terminology from "insulation lock" to "cable tie"
1 Front cover Revision: Format
2.3.4 Revision: Procedure to set MECHATROLINK-III station address
4.5.5 Addition: Information on saving data to flash memory
Back cover Revision: Address and format
0 – Based on Japanese user's manual, SIJP C880725 00G<8>-0, published in October
2014.
All chapters Deletion: Description of MP2000 series
Back cover Revision: Address
0 – Based on Japanese user's manual, SIJP C880725 00E<6>-0, published in February
2014.
All chapters Addition: Description of MP3300
Addition: Description of CPU-202
Back cover Revision: Address
0 – Based on Japanese user's manual, SIJP C880725 00B<1>-0, published in May
2012.
1 All chapters Deletion: Description of Rack Expansion Interface Unit
Back cover Revision: Address
– – First edition
Revised Contents
Revision History-1