2.2.4
Replacing and Adding Optional Modules
Use the following procedure to replace or add Optional Modules.
Always create a backup before replacing or adding Optional Modules.
Back up the program from the MP3000-series Controller to the PC using the MPE720.
Important
1.
Turn OFF the power supply and disconnect all cables from the MP3000.
2.
Pull the notch on the side toward you to remove the battery cover.
3.
Insert the protruding part of the battery cover into the slot on top of the Optional Module
panel to unhook the tab. Face the front of the battery cover toward you for this opera-
tion.
Information
Unhook the bottom tab in the same way.
Use the same method to remove the Option Cover from an unused slot before adding an
Optional Module.
2.2 MP3300 Installation
2.2.4 Replacing and Adding Optional Modules
2
2-31