5.3
Monitoring Machine Operation
This section describes how to monitor a machine that is connected to the Machine Controller.
5.3.1
Axis Monitor
You can monitor the operating status for each axis that is connected to the Machine Controller.
You can display the operating status of the axes and the data of other monitor parameters.
You can use the Axis Monitor Tab Page to check the Ready/Servo ON status ("Ready/Servo
Information
Enable"), the Alarm/Warning status, the Distribution/Positioning Completed ("Prof. Comp/In
Position") status, and the motion command.
Starting the Axis Monitor
Double-click Axis configuration − Axis Monitor in the System Pane of MPE720 version 7.
Alternatively, click the Axis Monitor Button in the My Tool Tab Page.
5.3 Monitoring Machine Operation
5.3.1 Axis Monitor
5
5-35