YASKAWA MP3000 Series Setup Manual page 230

5.1 Debugging Ladder Programs
5.1.8 Forcing Coils ON and OFF
 Tool Bar
• Force Coil Condition Setting Button (
Click this button to display the Force Coil Condition Setting Dialog Box. Specify the program
to search for forced coils.
• Repeat Search Button (
Click this button to repeat the forced coil search in the program that was specified in the
Force Coil Condition Setting Dialog Box.
• Cancel Forcing Button (
Click this button to cancel the forced status of the selected coils.
• Force ON Button (
Click this button to force ON the selected coils.
• Force OFF Button (
Click this button to force OFF the selected coils.
• Variable Display Switch Button (
Click this button to switch the display of the register that is used by the coil between a regis-
ter or a variable.
 List

Forcing Status
This column displays the forced ON or OFF status of the coils that were found.

Coil
This column displays the coils that were found.
There are six types of coils.
Coil
Set Coil
Reset Coil
 Programs
This column displays the names of the programs where the coils were found.
 Variable
This column displays the variables or registers that are set for the coils that were found.

Comment
This column displays the comments of the variables.

Execution Step
This column displays the execution step numbers of the coils that were found.
 Check Boxes
The coils with selected check boxes will be subject to forcing operations (ON, OFF, or Can-
cel). You can use the toolbar buttons and also the pop-up menu to force the status of all
selected coils to ON, OFF, or canceled.
5-20
)
)
)
)
Coil Type
ON
−/ (ON)−
−/ (S ON)−
−/ (R ON)−
)
)
Coil Symbol
OFF
−/ (OFF)−
−/ (S OFF)−
−/ (R OFF)−