Alarm Monitor - YASKAWA MP3000 Series Setup Manual

5.2 Debugging a Motion or a Sequence Program

5.2.9 Alarm Monitor

5.2.9

Alarm Monitor

Use this dialog box to check any alarms that occur during motion program execution.


No.








5-28
  
Name
Task
Program name
Block number
Axis number
Status (alarm name)
Alarm Contents
Corrective Action
OK
 
Displays the task numbers.
Displays the program numbers.
Displays the block numbers where the alarms occurred.
Displays the axis numbers where the alarms occurred.
Displays the names of the alarms.
This box displays a description of the alarm.
This box displays information on correcting the condition that
caused the alarm.
The OK Button closes the Motion Alarm Dialog Box and returns to
the Motion Editor Tab Page.
Description
