YASKAWA MP3000 Series Setup Manual page 257

No. Item
 Add Button

Delete Button

Trace Target

OK

Cancel
 Sampling and Trigger Settings
This dialog box is used to set the trace name, the sampling settings, and the trig-
ger setting parameters.
Click the Sampling & Trigger Setting Button to display the following dialog box:




No. Item

Trace Name

Sampling Setting
Use this button to add registers to the Trace Target List.
Use this button to delete the selected registers from the Trace Target List.
Displays the trace target registers. You can select the registers from the
Trace Target List, or you can also enter the registers directly.
Right-click in the Trace Target List to display the pop-up menu to edit the
Trace Target List.
Insert the Line inserts a blank row.
Delete the Line deletes a row. If a trace target setting was added, then it will
be deleted.
The OK Button sets the Trace Target, and enables the Sampling & Trigger
Setting Button.
The Cancel Button returns you to the Real-Time Trace Dialog Box without
setting the trace target.
Use this box to specify a name or comment for the trace. You can use up
to 32 characters.
Use these options to set the data sampling conditions.
The recommended maximum measurement time will be displayed.
5.3 Monitoring Machine Operation
5.3.3 Realtime Tracing
Continued from previous page.
Description

Description
Continued on next page.
5
5-47