YASKAWA MP3000 Series Setup Manual page 98

Machine controller system
Hide thumbs Also See for MP3000 Series:
Table of Contents

Advertisement

3.6 Device-specific Settings
3.6.1 Data That Is Automatically Updated during Self Configuration
Module Configuration Definition Tab Page Details
The following table describes the items that are displayed in the Module Configuration Defini-
tion Tab Page.
No.
*
Set I/O registers so that the same registers are not used by more than one Function Module.
3-20
Item
Displays the Module that is set for the
Module
slot.
Function Module/
Displays the Function Modules and
Slave
slaves that are used by the Module.
In Online Mode, displays the status of
the Function Modules and the com-
Status
munications status of MECHA-
TROLINK slave devices.
Displays the first circuit number that is
Start
assigned to the Module.
Circuit
No./Axis
Occu-
Displays the number of circuits that
Address
pied cir-
are assigned to the Module.
cuits
Displays the first and last register
Motion Register
numbers of the motion parameters.
Used to disable inputs or outputs by
Disabled
selecting the check boxes.
Displays the range of registers that is
used as an I/O area by the Function
Start -
Module. For the SVC or SVC32, the
Register
End
first and last registers of the I/O Mod-
(Input/
ules that are connected to MECHA-
Output)
TROLINK are displayed.
Displays the number of words in the I/
Size
O area.
Displays the scan in which the I/O ser-
Scan
vice is performed for the I/O device.
Comment
Displays the user comment.
Display/Setting Item
 
Setting Range/Settings
Any Module
Any Function Module or slave
Refer to the following sec-
tion.
Status Display Contents
on page 3-21
Circuit No. 1 to 16
1 to 2
The parameter is automati-
cally set based on the circuit
numbers.
Selected or not selected
Start: 0000 to 7FFF hex, End:
10000 to 17FFF hex, 800 hex
words max.
The size depends on the
function of the Module.
High or Low
You can enter up to 16 char-
acters for a Function Module.
You can enter up to 32 char-
acters for a MECHA-
TROLINK slave.
Editing
Possi-
ble
Possi-
ble
Not
possible
Possi-
ble
Possi-
ble
Not
possible
Possi-
ble
Possi-
ble
Possi-
ble
Possi-
ble
Possi-
ble

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mp3200Mp3300

Table of Contents