Resonance Flap (Gasoline Engine) - SSANGYONG Y200 Manual

1 Soft Cap (2)
2 Bolt (M6 X 40, 4 piecesc)
........................................... 9-11 N•m80-97 lb-in)
3 O-ring
Removal & Installation Procedure
1. Remove the 2 soft caps (1).
2. Remove the upper resonance flap coupling after
removing 4 bolt (2).
Installation Notice
Tightening Torque
3. Check the O-ring (3) and replace it if necessary.
4. Remove the lower resonance flap (5).
5. Replace the gasket (6).
6. Installation should follow the removal procedure
in the reverse order.
SSANGYONG Y200

RESONANCE FLAP (GASOLINE ENGINE)

9 - 11 N•m
(80 - 97 lb-ft)
ENGINE INTAKE & EXHAUST 1G-15
4 Vacuum Hose
5 Resonance Flap
6 Gasket .................................................... Replace
YAD1G270