SSANGYONG Y200 Manual page 808

1G-20 ENGINE INTAKE & EXHAUST
Removal & Installation Procedure
1. Remove the exhaust manifold to front exhaust pipe
nuts and mounting hanger.
Installation Notice
Tightening Torque
YAD1G350
2. Remove the front exhaust pipe to diesel oxidation
catalyst converter nuts and front exhaust pipe.
Installation Notice
Tightening Torque
YAD1G360
3. Remove the diesel oxidation catalyst converter to
muffler nuts and diesel oxidation catalyst
converter.
Installation Notice
Tightening Torque
4. Remove the muffler to tail exhaust pipe nuts.
Installation Notice
Tightening Torque
YAD1G370
5. Remove the mounting hangers and then remove
the muffler and tail exhaust pipe.
6. Check the muffler and pipes for holes, damage,
open seams, or other deterioration which could
permit exhaust fumes to seep into the passenger
compartment or the trunk.
7. Installation should follow the removal procedure
in the reverse order.
YAD1G320
15 - 28 N•m
(11 - 21 lb-ft)
28 - 47 N•m
(21 - 35 lb-ft)
28 - 47 N•m
(21 - 35 lb-ft)
28 - 47 N•m
(21 - 35 lb-ft)
SSANGYONG Y200