SSANGYONG Y200 Manual page 805

SSANGYONG Y200
ENGINE INTAKE & EXHAUST 1G-17
Removal & Installation Procedure
1. Disconnect the oxygen sensor electrical
connectors.
2. Remove the exhaust manifold to front exhaust pipe
nuts.
Installation Notice
Tightening Torque
YAD1G290
3. Remove the oxygen sensor and hanger from the
front exhaust pipe.
4. Remove the front exhaust pipe to muffler nuts.
Installation Notice
Tightening Torque
YAD1G300
5. Remove the muffler to tail exhaust pipe nuts.
Installation Notice
Tightening Torque
YAD1G310
6. Remove the Mounting hunger and muffler.
YAD1G320
15 - 28 N•m
(11 - 21 lb-ft)
28 - 47 N•m
(21 - 35 lb-ft)
28 - 47 N•m
(21 - 35 lb-ft)