Intake Manifold (Gasoline Engine) - SSANGYONG Y200 Manual

Preceding Work : Removal of fuel distributor and injection valve
1 Bolt (M6 X 40, 4 pieces)
.........................................9-11 N•m (80-97 lb-in)
2 Softcap
3 Resonance Flap
4 Gasket.................................................... Replace
5 Upper Intake Manifold
6 Bolt (M8 X 50, 9 pieces)
........................... 22.5-27.5 N•m (16.6-20.3 lb-ft)
7 Gasket.................................................... Replace
8 Blow-by Hose
9 Blow-by Hose
10 Clamp
11 Blow-by Nipple
12 Inlet Air Housing
SSANGYONG Y200

INTAKE MANIFOLD (GASOLINE ENGINE)

ENGINE INTAKE & EXHAUST 1G-11
13 Bolt (M6 X 40, 4 pieces)
......................................... 9-11 N•m (80-97 lb-in)
14 Throttle Body-Electric
15 Gasket .................................................... Replace
16 Lower Intake Manifold
17 Bolt (M8 X 40, 4 pieces)
........................... 22.5-27.5 N•m (16.6-20.3 lb-ft)
18 Nipple
19 Seal Ring
20 Connector
21 Connection House
22 Clamp
23 Noise Damper Assembly
24 Tapping Screw
YAD1G190