Dhcp Pool Creation; Dhcp Subnet; Range Of Ip Address - Siemens S223 User Manual

UMN:CLI
8.8.1.1
8.8.1.2
i
8.8.1.3
240

DHCP Pool Creation

The DHCP pool is a group of IP addresses that will be assigned to DHCP clients by
DHCP server. You can create various DHCP pools that can be configured with a different
network, default gateway and range of IP addresses. This allows the network administra-
tors to effectively handle multiple DHCP environments.
To create a DHCP pool, use the following command.
Command
ip dhcp pool POOL
no ip dhcp pool POOL
The following is an example of creating the DHCP pool as sample.
SWITCH(config)# service dhcp
SWITCH(config)# ip dhcp pool sample
SWITCH(config-dhcp[sample])#

DHCP Subnet

To specify a subnet of the DHCP pool, use the following command.
Command
network A.B.C.D/M
no network A.B.C.D/M
The following is an example of specifying the subnet as 100.1.1.0/24.
SWITCH(config)# service dhcp
SWITCH(config)# ip dhcp pool sample
SWITCH(config-dhcp[sample])# network 100.1.1.0/24
SWITCH(config-dhcp[sample])#
You can also specify several subnets in a single DHCP pool.

Range of IP Address

To specify a range of IP addresses that will be assigned to DHCP clients, use the follow-
ing command.
Command
range A.B.C.D A.B.C.D
no range A.B.C.D A.B.C.D
SURPASS hiD 6615 S223/S323 R1.5
Mode
Creates a DHCP pool and opens DHCP Pool Configu-
ration mode.
Global
Deletes a created DHCP pool.
Mode
Specifies a subnet of the DHCP pool.
A.B.C.D/M: network address
DHCP Pool
Deletes a specified subnet.
Mode
Specifies a range of IP addresses.
A.B.C.D: start/end IP address
DHCP Pool
Deletes a specified range of IP addresses.
User Manual
Description
Description
Description
A50010-Y3-C150-2-7619