Reorganizing The Program Memory ("Reorg") - Siemens Sinumerik 810T User Manual

11.90

3.1.13.8 Reorganizing the program memory ("REORG")

Using the "REORG" function, the contents of the program memory can be reorganized.
The space that has been cleared by deleting the programs, can be used again for the input of
programs.
Sequence of operation
PART PROG.-
PROGRAM HANDL.
REORG
The program memory is reorganized by the control.
DIREC-
TORY
The available memory space is displayed on the CRT.
Attention:
The available (displayed) memory cannot be used to its full capacity!
The following must be deducted from the displayed capacity:
• 10 % are reserved blank (blanks are provided for subsequent editing)
• plus: 11 characters multiplied by the number of possible programs (max. 200) in
program memory.
The number of possible programs is fixed in a machine
© Siemens AG 1990 All Rights Reserved
SINUMERIK 810T, GA3 (BN)
In any of the operating modes,
PRESET / JOG / AUTOMATIC / INC 1 .... INC 10 000 /
REFPOINT, operate the "PART PROGRAM" and
"PROGRAM HANDLING" softkeys one after the
other.
Operate the "REORG" softkey.
Switch back to the higher-level menu for softkey
functions, and subsequently operate the
"DIRECTORY" softkey.
data.
6ZB5 410-0EP02
3 Operating Sequences
3.1.13 Program management
3-65