NEC UNIVERGE SV9100 Features And Specifications page 1267

Related Features

IP Multiline Station (SIP)

Meet Me Paging

Meet Me Paging Transfer

Paging, External

Paging, Internal
Guide to Feature Programming
Program
Program Name/Description
Number
10-19-01 VoIP DSP Resource Selection
Select type of VoIP ETU DSP Resource. This
program setting has no affect on the terminal/
trunk port assignment or usage.
DT800/DT700 Server Information Setup –
10-46-11
Multicast IP Address
Set the Multicast IP address so that two or
more main devices don't overlap on the same
network, or if Multicast is used by other IP
services.
DT800/DT700 Server Information Setup –
10-46-12
Multicast Port
Sets the starting port number used by Multicast.
Service Code Setup (for Service Access) –
11-12-19
Internal Group Paging
Service code setup.
IP Telephone Terminal Basic Data Setup –
15-05-38
Paging Protocol Mode
Sets the protocol mode for the Paging function.
15-07-01 Programmable Function Keys
Assign function keys for Internal Paging Zones
(code 21 + page zone) and Internal All Call
Paging (code 22).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Input Data
0 = Common use for both IP
extensions and trunks
1 = IP Extension
2 = SIP Trunk
3 = CCIS/Networking
4 = Use for NetLink 5
= Blocked
6 = Common without Unicast
Paging
7 = Multicast Paging
8 = Unicast Paging
224.0.0.0 ~ 239.255.255.255
0 ~ 65535
MLT, SLT
*
#
0 ~ 9, , Maximum of eight
digits
0 = Multicast
1 = Unicast
2 = Auto
Line Key 1 ~ 48
0 ~ 99 (Normal Function Code
851 by default)
* *
00 ~ 99 (Appearance
Function Code) (Service Code
852 by default)
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
1267
Default
Resource 1 = 1
Resource 2 ~
256 = 0
224.0.0.10
30000
801
0
Extension port
101 = Class 15
All other
extension port =
Class 1