Hold
Message Waiting
One-Touch Calling
Programmable Function Keys
Transfer
Guide to Feature Programming
Program
Program Name/Description
Number
10-09-01
DTMF and Dial Tone Circuit Setup
Assign at least one circuit for DTMF reception
(type 0 or 1). Use the following as a guide when
allocating DTMF receivers:
In light traffic sites, allocate one DTMF
receiver for every 10 devices that use them.
In heavy traffic sites, allocate one DTMF
receiver for every five devices that use
them.
Package Network Setup – IP Address
10-55-01
Define the IP Address for the GCD-ETIA.
When the blade is deleted from the system
using Program 90-05, the programming for the slot
in 10-55 is set back to default.
Package Network Setup – Main/Add-on
10-55-03
Set to 0 to distribute an IP Address to the blade.
Package Network Setup – Sub Net Mask
10-55-04
Define the subnet mask for the GCD-ETIA.
Package Network Setup – Default Gateway
10-55-05
Define the default gateway for the GCD-ETIA.
Input Data
0 = Common Use
1 = Extension Only
2 = Trunk Only
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255255.254
192.0.0.1 ~ 223.255.255.254
0 = Main
1 = Add-on
128.0.0.0 | 192.0.0.0 | 224.0.0.0
|240.0.0.0 | 248.0.0.0 | 252.0.0.0
|254.0.0.0 | 255.0.0.0
|255.128.0.0 | 255.192.0.0
|255.224.0.0 | 255.240.0.0
|255.248.0.0 | 255.252.0.0
|255.254.0.0 | 255.255.0.0
|255.255.128.0 | 255.255.192.0
|255.255.224.0 | 255.255.240.0
|255.255.248.0 | 255.255.252.0
|255.255.254.0 | 255.255.255.0
|255.255.255.128
|255.255.255.192
|255.255.255.224
|255.255.255.240
|255.255.255.248
|255.255.255.252
|255.255.255.254
|255.255.255.255
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.255255.254
192.0.0.1 ~ 223.255.255.254
1252
Default
Circuit/Resource
01 ~ 08 = 1
(Extensions)
Circuit/Resource
09 ~ 32 = 2
(Trunks)
Circuit/Resource
33 ~ 144 = 0
(Common)
When
GPZ-BS10 is
installed, 81 ~
144 are available
172.16.1.100
1
255.255.0.0
0.0.0.0