Table of Contents
Advertisement
LED INDICATORS
You can also view the LEDs for the ES8520-XT through the web interface
using the Device Front Panel page.
LEDs
Power 1
Power 2
Sys (System)
Do (Digital
Output)
DI (Digital
Input)
Ring (Ring
Master)
Link/Act
1000
Link/Act
Speed
PROGRAMMING THE IP ADDRESS
Configure the IP address using one of the following methods:
•
PortVision DX automatically detects Comtrol Ethernet attached products
physically attached to the local network segment so that you can
configure the network address, upload firmware, and manage.
LED On
Power On
System Operational
DO activated
DI activated
Green: Working as a
ring master
Amber: Ring abnormal
LEDs
LED On
Link/
Indicates the traffic
Act
and link status
Speed
Indicates the copper
port link speed
1000
SFP transceiver
speed indicator
LED Blinking
System is uploading
firmware or the system is
rebooting
Green: Ring with wrong
port
Amber: Device's ring port
failed
LED Blinking
On: Port is linked to another device.
Blinking: The traffic is active
Off: Port not connected
On: Port link is 1000Mbps
Off: Port link is 100Mbps or 10 Mbps
On: The SFP is 1000 Mbps
Off: Port link is 100Mbps or 10 Mbps
5
LED Off
No Power
System not ready
DO not activated
DI not activated
Ring function not
enabled
Advertisement
Table of Contents
