Gvrp Configuration - Comtrol ROCKETLINX ES8509-XT User Manual

GVRP Configuration

GARP VLAN Registration Protocol (GVRP) allows you to set-up VLANs automatically rather than manual
configuration on every port on every switch in the network. GVRP conforms to the IEEE 802.1Q specification.
This defines a method of tagging frames with VLAN configuration data that allows network devices to
dynamically exchange VLAN configuration information with other devices.
GARP (Generic Attribute Registration Protocol), a protocol that defines procedures by which end stations and
switches in a local area network (LAN) can register and de-register attributes, such as identifiers or
addresses, with each other. Every end station and switch thus has a current record of all the other end
stations and switches that can be reached. GVRP, like GARP, eliminates unnecessary network traffic by
preventing attempts to transmit information to unregistered users. In addition, it is necessary to manually
configure only one switch and all the other switches are configured accordingly.
GVRP Configuration Page
GVRP Protocol
State
Join Timer
Leave Timer
Leave All Timer Controls the period to initiate the garbage collection of registered VLAN.
Apply
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Allows you to Enable/Disable GVRP globally.
After enabling GVRP globally, you can still Enable/Disable GVRP by port.
Controls the interval of sending the GVRP Join BPDU (Bridge Protocol
Data Unit). An instance of this timer is required on a per-port, per-GARP
participant basis.
Controls the time to release the GVRP reservation after having received the
GVRP Leave BPDU. An instance of the timer is required for each state
machine that is in the LV state.
The timer is required on a per-port, per-GARP participant basis.
Click Apply to apply the settings.
Note: You must Save the settings
settings if the ES8509-XT is powered off.
Configuration Using the Web Interface
(Page 127), if you want to maintain these
GVRP Configuration - 95