Table of Contents
Advertisement
(VLAN) Interface Configuration
Press interface VLAN VLAN-
ID in global configuration
mode. You can then enter
VLAN interface configuration
mode. In this mode, you can
configure the settings for the
specific VLAN.
The VLAN interface name of
VLAN 1 is VLAN 1, VLAN 2
is VLAN 2...
Type exit to leave the mode.
Type ? to see the available
command list.
The command lists of the
VLAN interface configuration
mode.
This table is a summary of the five command modes.
Command Mode
User EXEC
This is the first level of
access.
You can ping, telnet remote
device, and show some basic
information
Privileged EXEC
In this mode, the system
allows you to view current
configuration, reset default,
reload switch, show system
information, save
configuration and enter
global configuration mode.
Global
In global configuration
configuration
mode, you can configure all
the features that the system
provides you.
Port Interface
In this mode, you can
configuration
configure port related
settings.
VLAN Interface
In this mode, you can
Configuration
configure settings for
specific VLAN.
(VLAN) Interface Configuration
Switch(config)# interface vlan 1
Switch(config-if)#
description
end
exit
ip
list
no
quit
shutdown
Main Function
Enter: Login successfully
Exit: exit to logout.
Next mode: Type enable to enter privileged
EXEC mode.
Enter: Type enable in User EXEC mode.
Exec: Type disable to exit to User EXEC
mode.
Type exit to logout
Next Mode: Type configure terminal to
enter global configuration command.
Enter: Type configure terminal in
privileged EXEC mode
Exit: Type exit or end or press Ctrl-Z to
exit.
Next mode: Type interface IFNAME/
VLAN VID to enter interface configuration
mode
Enter: Type interface IFNAME in global
configuration mode.
Exit: Type exit or Ctrl+Z to global
configuration mode. Type end to privileged
EXEC mode.
Enter: Type interface VLAN VID in
global configuration mode.
Exit: Type exit or Ctrl+Z to global
configuration mode. Type end to privileged
EXEC mode.
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 27
Interface specific description
End current mode and change to enable mode
Exit current mode and down to previous mode
Interface Internet Protocol config commands
Print command list
Negate a command or set its defaults
Exit current mode and down to previous mode
Shutdown the selected interface
Enter and Exit Method
Feature Configuration
Prompt
Switch>
Switch#
Switch(config)#
Switch(config-if)#
Switch(config-vlan)#
Advertisement
Table of Contents
