Table of Contents
Advertisement
Configuration Using the Web Interface
IGMP Snooping
Use this page to enable the IGMP Snooping feature, assign IGMP Snooping for specific VLANs, and view the
IGMP Snooping Table from a dynamic learnt or static that you provide..
IGMP Snooping Page
IGMP Snooping Global
Setting
IGMP Snooping VLAN Setting
VLAN
IGMP Snooping
Filtering Mode
IGMP Snooping Table
Note: You must Save the settings
powered off.
102 - IGMP Snooping
You can select to Enable or Disable IGMP Snooping.
After enabling IGMP Snooping, you can then enable IGMP Snooping for
specific VLAN using the IGMP Snooping VLAN Setting table.
Refers to the VLAN number that was configured using the VLAN
Configuration page.
Select Enable to start IGMP snooping on the selected VLAN.
The available filtering modes are:
•
Broadcast-Unknown- The unknown multicast is broadcast to all ports
even if they are not member ports of the groups.
•
Discard-Unknown - The unknown multicast is discarded. Non-member
ports do not receive the unknown multicast streams.
•
Source-only-learning - This is forwarding unknown multicast traffic to
all ports that are already members of a multicast group.
This table displays the multicast group IP address, VLAN ID it belongs to,
and member ports of the multicast group. The ES8509-XT supports 256
multicast groups. Click Reload to refresh the table.
(Page
127), if you want to maintain these settings if the ES8509-XT is
RocketLinx ES8509-XT User Guide: 2000557 Rev. D
Advertisement
Table of Contents
