Table of Contents
Advertisement
Security
The RocketLinx ES7528 provides several security features for you to secure your connection. The features include Port
Security and IP Security.
The following commands are included in this group:
•
Filter Set (Access Control List)
-
MAC Filter (Port Security)
-
on Page 109
IP Filter
-
on Page 111
Filter Attach
•
802.1x Configuration
•
802.1x Port Configuration
•
on Page 114
802.1x Port Status
•
CLI Commands for Security
Filter Set (Access Control List)
The Filter Set is known as Access Control List (ACL) feature. There are two major types:
•
MAC Filter, which is called Port Security in other RocketLinx switches. It allows you to define the access rule based on
the MAC address.
•
IP Filter, which is called IP security in other RocketLinx models and supports the IP Standard access list, and advanced IP
based access lists.
You can use Access Control Entry (ACE) to define a Permit or Deny rule for specific IP or MAC address, or IP groups by
network mask in each ACE. One AC L may include several ACEs. The system checks the ACEs one after another and forwards
the data based on the result.
If the rules conflict, the oldest entry is selected.
To define rules using the MAC Filter, click MAC Filter, and type the Name.
To define rules using the IP Filter, click IP Filter, and type the ID/Name. The ID for the IP access list is listed as below of the
field.
Security
on Page 107
on Page 112
on Page 113
on Page 115
RocketLinx ES7528 Industrial Managed PoE Rack Mount User Guide: 2000509 Rev. A - 105
Security
Advertisement
Table of Contents
