Trouble-clearing procedures
EQPT
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Reseat the card. Refer to
3
...................................................................................................................................................................................................
4
Replace the card. Refer to
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D
O F
...................................................................................................................................................................................................
EQPTBOOT
EQPTBOOT (Card failure - boot failure)
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step. If
this condition is raised against the user panel or a fan tray, then after each step warm reset
the active Equipment Controller.
....................................................................................................................................................................................................................................
2-74
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Critical
Yes
112SCA1, 112SCX10, 112SX10L, 11DPE12, 11QPA4, 11STAR1,
11STMM10, 11STGE12, 43SCX4, 43STA1P, 43STX4, 43STX4P,
4DPA2,F 4DPA4, AHPHG, AHPLG, ALPHG, ALPFGT,
AM2017B, AM2125A, AM2125B, AM2318A, AM2325B, CWR,
MESH4, MT0C, MVAC, OPS, OSCT, RA2P, SVAC, WR,
WTOCM
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
3-19).
3-19).
EQPT (Card Failure - Device)
3-20). Follow the return
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011