Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 683

Supporting procedures
Changing the Equipment Controller Configuration in an NE
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
The EC Protection Software Settings window is displayed. Note the Protection Setting
5
field.
...................................................................................................................................................................................................
To switch the Equipment Controller, select
6
...................................................................................................................................................................................................
Click Submit
7
...................................................................................................................................................................................................
8 Remove any cables that are attached to the Equipment Controller to be removed.
...................................................................................................................................................................................................
Remove the Equipment Controller from the slot.
9
...................................................................................................................................................................................................
10 Select the slot for the Equipment Controller in the Equipment Tree that you removed.
...................................................................................................................................................................................................
Click the Delete tab.
11
Result:
...................................................................................................................................................................................................
Select the Delete this Card field, and click
12
...................................................................................................................................................................................................
13 Insert an Equipment Controller blank into the empty Equipment Controller slot.
E
N D O F
...................................................................................................................................................................................................
Changing an NE From a Redundant to a Nonredundant Equipment Controller Configuration Using
the CLI
...................................................................................................................................................................................................
1 To backup the NE's database, see
...................................................................................................................................................................................................
2 If...
the Equipment Controller to be removed is
active (the Active LED is green)
the Equipment Controller to be removed is not
active (the Active LED is not lit)
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
.
The Delete Card window is displayed.
S T E P S
Changing an NE From a Redundant to a Nonredundant
Enable Protection Switch
Submit .
"Backing Up a Database" (p.
Then...
continue with
proceed to
Equipment Controller Configuration
.
3-13).
Step 3.
Step 4.
3-75