Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 535

Trouble-clearing procedures
RFIEGR
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Perform the steps in the procedure
2
E
N D O F
...................................................................................................................................................................................................
RFIL
RFIL (Remote Fault Indication)
An RFIL condition may be raised on a client or network SDH port of the listed line cards
and may be attributed to a fault on the remote device (the equipment connected to the
client or network port). The remote device is either detecting a problem on its receive link
or has some sort of local fault and is generating an RFI in the downstream direction.
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
Retrieve alarms and conditions for the local NE that has the RFI-L condition on its
1
receive port. Examine them and identify faults on the services supporting the devices that
have the RFI-L condition. Resolve any issues with respect to these faults first.
...................................................................................................................................................................................................
Repeat
2
services.
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
S T E P S
Not reported
No
11STMM10
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
Step 1 for the far end device. Examine the devices associated with the same
"LANRFI" (p. 2-123)
3-19).
RFIEGR (Remote Client Remote Fault)
on the far end port.
2-285