Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 409

Trouble-clearing procedures
LOS
....................................................................................................................................................................................................................................
WEBUI
...................................................................................................................................................................................................
8 Remove the pluggable module from the port on the card it is inserted in. Examine the
connector on the pluggable module and the receptacle connector on the card where the
pluggable module plugs into for any damage. If no damage is seen, reinsert the pluggable
module into its port.
...................................................................................................................................................................................................
9 Remove and replace the pluggable module with another unit of the same type, being
careful with the connected fiber jumpers. Refer to
...................................................................................................................................................................................................
Perform a cold reset of the card.
10
Note: Refer to Caution at the beginning of this procedure.
CLI
WEBUI
...................................................................................................................................................................................................
Reseat the card. Refer to
11
...................................................................................................................................................................................................
12 Replace the card. Refer to
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D O F
...................................................................................................................................................................................................
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
Select the card, click the
config card
Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Reboot tab, select
"Replacing an SFP Module" (p.
card_type shelf slot
reset cold
Reboot tab, select
3-19).
LOS (Loss of signal)
Warm Reboot > Submit .
Cold Reboot > Submit .
3-20). Follow the return
3-27).
2-159