Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 579

Trouble-clearing procedures
TRMT
....................................................................................................................................................................................................................................
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1 Perform a warm reset of the card.
CLI
WEBUI
...................................................................................................................................................................................................
Remove the pluggable module from the port on the card it is inserted in. Examine the
2
connector on the pluggable module and the receptacle connector on the card where the
pluggable module plugs into for any damage. If no damage is seen, reinsert the pluggable
module into its port.
...................................................................................................................................................................................................
Remove and replace the pluggable module with another unit of the same type, being
3
careful with the connected fiber jumpers. Refer to
...................................................................................................................................................................................................
4 Perform a cold reset of the card on the card where the pluggable module failure is raised.
CLI
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
Critical.
Yes.
112SCA1, 112SCX10, 11DPE12E, 11STAR, 11STMM10,
11STGE12, 43SCX4, 43STA1P, 43STX4, 43STX4P, MVAC,
SVAC
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
config card
Select the card, click the
config card
3-19).
card type shelf slot
reset warm
Reboot tab, select
"Replacing an SFP Module" (p.
card_type shelf slot
reset cold
TRMT (Port Transmit Failure)
Warm Reboot > Submit .
3-27).
2-329