Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 461

Trouble-clearing procedures
OCHCOLLISION
....................................................................................................................................................................................................................................
WEBUI
...................................................................................................................................................................................................
7 Reseat the card. Refer to
...................................................................................................................................................................................................
Replace the card. Refer to
8
E
N D O F
...................................................................................................................................................................................................
OCHCOLLISION-OUT
OCHCOLLISION-OUT (Channel collision Output Direction)
Wavelength Tracker has detected more than one instance of the same channel at this port.
This is likely due to a fibering problem or equipment failure upstream from the alarmed
port.
Note: The alarmed port indicates the first occurrence of the collision along the path.
All downstream occurrences are flagged as conditions.
Severity
Service affecting?
Applicability
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
1. Select Reports
2. Select
Reports
3. Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Critical. Not alarmed at ALPHG ingress.
Yes. No at ALPHG ingress.
A2325A, AHPHG, AHPLG, ALPHG, ALPFGT, AM2017B,
AM2125A, AM2125B, AM2325B, CWR8, OSCT
> Alarm List > Total .
> .
Condition List
Reboot tab, select
3-19).
OCHCOLLISION (Channel collision)
Cold Reboot > Submit .
3-20).
2-211