Supporting procedures
Replacing System Components
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
5
Use hook on end of XFP extractor/LC connector tool to pull the XFP straight back until
its bail can be grasped by fingers.
Figure 3-4 XFP bail pull
...................................................................................................................................................................................................
6
Grasp the bail with fingers and completely extract XFP module.
...................................................................................................................................................................................................
Ensure that the specifications for the replacement XFP module (protocol, wavelength, and
7
reach) match the specifications of the removed SFP module.
...................................................................................................................................................................................................
8
Slide the replacement XFP module into the XFP slot. Push on the front of the SFP module
until you hear a "click" sound, indicating the XFP module is securely locked into the XFP
slot.
...................................................................................................................................................................................................
9
Uncap, clean, and reinsert the fibers.
...................................................................................................................................................................................................
Check the interface for alarms:
10
CLI
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
alm
Replacing an XFP Module
3-31