Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 463

Trouble-clearing procedures
OCHCOLLISION-OUT
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Observe on the downstream NE if this is the only card reporting the collision. If so, warm
4
reset the only alarmed card.
CLI
WEBUI
...................................................................................................................................................................................................
5
CLI
WEBUI
...................................................................................................................................................................................................
Reseat the card. Refer to
6
...................................................................................................................................................................................................
7 Replace the card. Refer to
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D O F
...................................................................................................................................................................................................
OCHFDI
OCHFDI (Optical Channel Forward Defect Indication)
During the creation of a wavelength cross connect, the source node of the optical channel
will raise this non reported condition when the output wavelength is not launching at the
correct power or when the optical channel is missing. This condition clears when the
power of the wavelength is launching with the correct power. As the wavelength traverses
the network, subsequent NEs have the Channel FDI present on the ALPHG cards until the
power level of the wavelength reaches the target power. When the target power is
reached, the Channel FDI clears automatically within 5 minutes.
Note: This not-reported condition masks other reported optical channel alarms to
effectively suppress alarms and transient alarms during cross connect setup.
Severity
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config card
Select the card, click the
config card
Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Not reported
OCHCOLLISION-OUT (Channel collision Output Direction)
card_type shelf slot
reset warm
Reboot tab, select
card_type shelf slot
reset cold
tab, select
Reboot
3-19).
Warm Reboot > Submit .
> .
Cold Reboot Submit
3-20). Follow the return
2-213