Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 436

Trouble-clearing procedures
MISMATCH
....................................................................................................................................................................................................................................
MISMATCH (Card Mismatch)
The Card Mismatch alarm indicates that the card inserted into the affected slot is of a
different type than that which was provisioned. This could occur when there is a card type
mismatch.
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
Display the provisioned card type:
1
CLI
WEBUI
...................................................................................................................................................................................................
Verify from the network plan what type of card is supposed to be in that slot.
2
If...
it is a frequency dependent card (SFC or SFD)
....................................................................................................................................................................................................................................
2-186
Critical
Yes
112SA1L, 112SCX10, 112SX10L, 11DPE12E, 11DPM12,
11STAR1, 11STMM10, 11STGE12, 43SCX4, 43STA1P, 43STX4,
43STX4P, 4DPA2, 4DPA4, ALPHG, AHPHG, AHPLG, ALPFGT,
AM2017B, AM2125A, AM2125B, AM2318A, DCM, CWR,
ITLB, ITLU, MESH4, MVAC, OPS, OSCT, RA2P, SFC, SFD44,
SFD44B, SVAC, WR, WTOCM
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
shelf slot
show slot
In the Equipment Tree, select the desired card slot.
On the Details tab, view the value in the Present/Provisioned field.
3-19).
Then...
ensure the correct frequency.
MISMATCH (Card Mismatch)
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011