Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 680

Supporting procedures
Changing the Equipment Controller Configuration in an NE
....................................................................................................................................................................................................................................
Changing an NE from a Nonredundant to a Redundant Equipment Controller configuration Using
the WebUI
...................................................................................................................................................................................................
1 To check that the NE is running software of Release 1.1.0 or higher, select
Equipment Tree.
Result:
...................................................................................................................................................................................................
View the software version in the Active Software Release field.
2
...................................................................................................................................................................................................
3 Backup the NE's database (see
...................................................................................................................................................................................................
Install the redundant Equipment Controller into the shelf in slot 18.
4
...................................................................................................................................................................................................
5 Wait a few minutes for the Equipment Controllers to synchronize.
...................................................................................................................................................................................................
Connect the Equipment Controller cables. Refer to the Alcatel-Lucent Product
6
Information and Planning Guide.
E
N D O F
...................................................................................................................................................................................................
Changing an NE from a Nonredundant to a Redundant Equipment Controller Configuration Using
the CLI
...................................................................................................................................................................................................
To check that the NE is running software of Release 1.1.0 or higher, type
1
...................................................................................................................................................................................................
To backup the NE's database, see
2
...................................................................................................................................................................................................
3 Install the redundant Equipment Controller into the shelf in slot 18.
...................................................................................................................................................................................................
Wait a few minutes for the Equipment Controllers to synchronize.
4
....................................................................................................................................................................................................................................
3-72
The System Properties window is displayed.
S T E P S
Changing an NE from a Nonredundant to a Redundant
"Backing Up a Database" (p.
"Backing Up a Database" (p.
Equipment Controller Configuration
System
3-13)).
sh version
3-13).
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
in the
.