Supporting procedures
Database Backup and Restore
....................................................................................................................................................................................................................................
Restoring a Database
Restoring the Database Using the WebUI
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
2
Enter the values for the fields on this window as described in
Backup and Restore Parameters" (p.
...................................................................................................................................................................................................
Click
Apply
3
Restore
E
N D
O F
...................................................................................................................................................................................................
Firmware
Selecting a Specific Firmware Version
Having completed the first steps of an in-service software upgrade, you may find that one
or more firmware conditions have been raised against cards in your system. Firmware
upgrades may be available, recommended, or required on these cards depending on the
resulting alarm condition. When you elect not to upgrade the firmware, having
understood the subsequent effect on your operations, use the following procedure to
maintain the current firmware in the cards.
Affected cards will have the following conditions raised against them:
• FWUPGRADEPENDING - Firmware upgrade pending
• FWVERSIONNOTDEFAULT - Firmware version loaded is not the preferred version.
....................................................................................................................................................................................................................................
3-14
Administration
>
Database
The Backup and Restore window is displayed.
>
Restore
, or if you want to use your previous serial number, click
.
S T E P S
>
Backup and Restore
3-13).
Restoring a Database
.
Table 3-1, "Database
Force
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011