Trouble-clearing procedures
AUTORESET
....................................................................................................................................................................................................................................
AUTORESET
AUTORESET (Card Autonomous Reset)
The addressed card or slot is performing an autonomous reset.
The AUTORESET condition is issued as a transient condition to inform you that a reset
of a pack has started. There is no corrective action to perform. Any failures on the pack
will be reported after the reset completes.
Severity
Service affecting?
Applicability
Corrective Action
No corrective action is required for AUTORESET. However, if repeated AUTORESET
events are reported against a single card, reseat the card. If the condition persists, replace
the card.
....................................................................................................................................................................................................................................
2-44
NA
No
112SA1L, 112SCA1, 112SCX10, 112SX10L, 11DPM12,
11STAR1, 11STMM10, 11STGE12, 43SCX4, 43STA1P, 43STX4,
43STX4P, 4DPA2, 4DPA4, A2325A, AHPHG, AHPLG, ALPHG,
ALPFGT, AM2017B, AM2325A, AM2318A, AM2325B, CWR8,
CWR8-88, EC, FLC, OPS, OSCT, MESH4, MT0C, MVAC,
RA2P, SVAC, WR, WTOCM
AUTORESET (Card Autonomous Reset)
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011