Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 603

1830 pss series photonic service switch
Table of Contents

Advertisement

Trouble-clearing procedures
VTSOCI
....................................................................................................................................................................................................................................
The OT has detected a Virtual Time Slot Open Connection Indication on an associated
VTS. This condition is raised when the downstream 11DPE12/11DPE12E OT receives an
APS/PCC message indicating an OCI from the upstream OT. The VTSOCI alarm is raised
at the downstream OT on the Virtual Time Slot [
Severity
Service affecting?
Applicability
Corrective action
This procedure details the corrective action for clearing the VTOCI alarm associated with
an 11DPE12/11DPE12E port.
...................................................................................................................................................................................................
Check the upstream 11DPE12/11DPE12E OT for any alarms/conditions on any VTS[
1
with electrical connections. This will cause the OT to send an OCI message for the
relevant VTS[
connection from the VTS[
present, go to the procedure for clearing OCI alarms to clear the VTSOCI alarm at the
downstream 11DPE12/11DPE12E OT.
E
N D
O F
...................................................................................................................................................................................................
WKSWBK
WKSWBK (Automatic switch to working)
WKSWBK indicates an automatic protection switch from the "protection side" to the
"working side". As a result, the working side becomes the active side. This can occur
when a fault is detected on the protection side, or when the user provisions the protection
side to Admin Down. It applies to all protection schemes (Y-cable, OPS, ESNCP) when
the protection group is non-revertive. (Y-cable can be provisioned to either revertive or
non-revertive. OPS and ESNCP are always non-revertive.)
Severity
Service affecting?
Applicability
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
Major
Yes
11DPE12/11DPE12E
] to the downstream OT. An electrical connection is a provisioned
n
] to a GbE client port or another line VTS. If such an alarm is
n
S T E P S
Not alarmed
No
11STAR1, 11STMM10, 11STGE12, 4DPA4, OPS
VTSOCI (VTS Open Connection Indication)
] which has an established connection.
n
]
n
2-353

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1830 pss-321830 pss-361830 pss-4

Table of Contents