Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 494

Trouble-clearing procedures
OPRUNACHIEVE
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Measure the optical power being received at the OT VA, SVAC, or MVAC input port to
8
confirm power is present. If the alarm has not cleared, replace the OT VA port SFP
EVOA, MVAC port SFP EVOA, or SVAC card. Refer to
Components" (p.
If the encoder is directly the line port of the OT:
1. Attempt a warm reset of the pack and wait to see if the problem clears.
• CLI:
• WebUI: Select the card, click the
2. Attempt a cold reset of the pack and wait to see if the problem clears.
• CLI:
• WebUI: Select the card, click the
3. Replace the OT card.
...................................................................................................................................................................................................
Follow the return and repair process in the Customer and Product Support guide to return
9
the faulty card to an authorized repair center for replacement.
E
N D O F
...................................................................................................................................................................................................
OPTINTBASE
OPTINTBASE (Optical Intrusion Baseline Needed)
An optical intrusion baseline value other than the default (-1) is needed for proper optical
intrusion detection.
Severity
Service affecting?
Applicability
...................................................................................................................................................................................................
1
Note: Only a user with administrative-level privileges can perform this procedure.
In the WebUI, select the affected card in the Equipment Tree.
....................................................................................................................................................................................................................................
2-244
3-20).
config card card type shelf slot reset warm
config card card type shelf slot reset cold
S T E P S
MN
No
A2325A, ALPHG, AHPHG, AHPLG, ALPFGT, AM2017B,
AM2125A, AM2125B, AM2325B, OSCT
OPRUNACHIEVE (Channel Power Unachievable)
"Replacing System
tab, select
Reboot Warm Reboot
Reboot tab, select Cold Reboot
8DG60888CAAA Release 3.6.0 and 3.6.1
> .
Submit
> Submit .
1830 PSS-36/PSS–32/PSS-16/PSS-4
Issue 1 June 2011