Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 425

Trouble-clearing procedures
LPBKTERM
....................................................................................................................................................................................................................................
Corrective Action
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
Remove the loopback from the port.
1
CLI
E
N D O F
...................................................................................................................................................................................................
LSPOW_ALM_W
LSPOW_ALM_W (Laser Back-Facet Optical Power Cross
Threshold)
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1 If another card failure is reported on the card, follow the procedure for that specific alarm.
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config interface <shelf slot port>
loopback terminal disabled
S T E P S
Major
No
43STX4P
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
LPBKTERM (Diagnostic (Terminal) loopback active)
3-19).
2-175