Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 574

Trouble-clearing procedures
TIM
....................................................................................................................................................................................................................................
Trail Trace Identifier Mismatch (Network Ports)
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
Verify that the physical fibering between the network receive port of the transponder and
1
the output port of the SFD5, SFD44, or SFC2/4/8 is correct.
...................................................................................................................................................................................................
2 Perform the procedure
NE and location of the transponder at the other end of this service.
...................................................................................................................................................................................................
Verify that the physical fibering between the network transmit port of the transponder and
3
the input port of the SFD5, SFD44, or SFC2/4/8 is correct.
...................................................................................................................................................................................................
Perform a warm reset of the card on the local card where the TIM condition is raised. If
4
the problem does not clear then perform a warm reset on the far-end card associated with
the local card raising the TIM condition.
CLI
WEBUI
....................................................................................................................................................................................................................................
2-324
Minor
No
11QPA4, 43STX4, 4DPA4
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
"Determining the Far End of a Service" (p. 3-10)
config card
Select the card, click the
Trail Trace Identifier Mismatch (Network Ports)
3-19).
card type shelf slot
reset warm
Reboot tab, select
to determine the
Warm Reboot > Submit .
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011