Alcatel-Lucent 1830 PSS-16 Maintenance And Trouble-Clearing User Manual page 480

Trouble-clearing procedures
OPR
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Replace the card. Refer to
9
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D O F
...................................................................................................................................................................................................
OPRLOSSHIGH
OPRLOSSHIGH (Out of Operational Range – Loss Too High
between DCM Ports of LD)
The OPR Out of Operational Range - Loss Too High alarm is raised when the loss
between the DCM in and out ports of a amplifier is too high.
Severity
Service affecting?
Applicability
Corrective Action
A cold reset, reseat, or replacement of a card is service impacting if the card is currently
carrying services. To determine if any services are currently carried over a card, perform
the procedure
If there are services currently carried over the card, it may be best to wait for a
maintenance window before resetting, replacing, or reseating the card.
At the end of each step wait to see if the fault clears. If not, continue with the next step.
...................................................................................................................................................................................................
1 Retrieve the optical power levels at the DCM port of the amplifier card where the alarm is
raised.
CLI
....................................................................................................................................................................................................................................
2-230
"Replacing System Components" (p.
S T E P S
NA
No
A2325A, AHPHG, AHPLG, ALPHG, AM2017B, AM2125A,
AM2125B, AM2325B, ALPFGT
NOTICE
Service-disruption hazard
"Reseating a Card" (p.
show interface <shelf slot port>
OPR (Channel Optical Power Out of Range)
3-19).
3-20). Follow the return
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011