Trouble-clearing procedures
EQPTBOOT
....................................................................................................................................................................................................................................
...................................................................................................................................................................................................
Perform a warm reset of the card.
1
CLI
WEBUI
...................................................................................................................................................................................................
Perform a cold reset of the card.
2
Note: Refer to Caution at the beginning of this procedure.
CLI
WEBUI
...................................................................................................................................................................................................
Reseat the card. Refer to
3
...................................................................................................................................................................................................
Replace the card. Refer to
4
and repair process in the Customer and Product Support guide to return the faulty card to
an authorized repair center for replacement.
E
N D
O F
...................................................................................................................................................................................................
EQPTDGR
EQPTDGR (Card Degrade - device)
The Card Degrade-Device alarm text for the EQPTDGR condition indicates a fault on the
card that has caused the system to declare a hardware failure. This condition may be
declared due to a failure in the SEEP or other unknown hardware failures depending on
the card type the alarm is raised against.
The Card Degrade-Device alarm text indicates a lower priority fault on the card that does
not directly affect the traffic currently flowing through the device.
Severity
Service affecting?
....................................................................................................................................................................................................................................
1830 PSS-36/PSS–32/PSS-16/PSS-4
8DG60888CAAA Release 3.6.0 and 3.6.1
Issue 1 June 2011
config card
Select the card, click the
config card
Select the card, click the
"Reseating a Card" (p.
"Replacing System Components" (p.
S T E P S
Minor
No
card type shelf slot
reset warm
tab, select
Reboot
card_type shelf slot
reset cold
tab, select
Reboot
3-19).
EQPTBOOT (Card failure - boot failure)
>
Warm Reboot
Submit
>
.
Cold Reboot
Submit
3-20). Follow the return
.
2-75