Code 128 — continued
Length Control
Fixed Length Decoding—
code if the label length matches one of the configurable fixed lengths.
Variable Length Decoding—
bar code if the label length falls in the range of the configurable Length 1 and Length 2 values.
START / END
Fixed Length Decoding
Code 128 Length 1, Length 2 Programming Instructions
See
Length 1, Length 2 Programming Instructions on page 154
this feature
START / END
DEFAULT SETTING FOR THIS FEATURE: 01
Set Length 2
Product Reference Guide
When fixed length decoding is enabled, the scanner will decode a bar
When variable length decoding is enabled, the scanner will decode a
PROGRAMMING bar codes
.
For Code 128 bar codes, only the data charac-
ters are included in the length calculations.
NOTE
PROGRAMMING bar codes
Variable Length Decoding
DEFAULT
for detailed instructions on setting
Set Length 1
DEFAULT SETTING FOR THIS FEATURE: 80
Code 128
113